C16i
数字称重传感器，用于数字汽车衡和轨道衡

• 对平台称或汽车衡进行偏心负载补偿: 通过软件进行灵敏度调整，无需焊接电阻.
• 更强的维护功能: TRADE® 软件使系统诊断更方便，甚至通过电话远程操作.
• 减少硬件需求，无需称重显示器和必须的 alibi 打印机.
• 更低的噪声: 数字信号传输.

TRADE® 软件 – PTB 测试证书 D09-00.34 – 对显示和存储的数据进行分度判定协议. 另外, DDE 接口可以和其他软件进行数据交换. 对于很多衡器制造商来说，需要做的事情复位后勤软件，让其和称重指示器和 TRADE® 软件进行通信.

C16i 数字称重传感器和模拟传感器 C16a 就有相同的尺寸.因此，对于衡器的数字化改造非常方便.

• Facilitated off-center load compensation with platform weighing machines: comfortable and error-free sensitivity balance via software command; no soldering in of resistors etc.
• Enhanced maintenance options: TRADE® makes the weighing system transparent right through to the load cell thus rendering diagnosis easier and more reliable even remotely via phone.
• Reduces hardware required: no weighing indicator nor alibi printer necessary.
• Lower noise sensitivity: digital signal transmission.

The custom designed TRADE® software – PTB test certificate D09-00.34 – which is admissible for verification enables measured data to be displayed and stored accordingly. Furthermore, a DDE interface is available for data exchange with other programs. The only thing the scales manufacturer has to do is to reset his logistics software that communicates with commercially available weighing indicators to the TRADE® software from HBM.

The C16i digital load cell has the same dimensions as the analog C16a version. Therefore, no mechanical modifications are required when retrofitting the scales.