K3607
K3607 标定设备 可以用于标定测量链或测量放大器,而无须施加机械量在传感器上.
因此,设备上有采用星形连接的高精度电阻,模拟 350-Ω 应变计 全桥传感器. 内置的电阻有极低的电容,电阻的精度等级为 0.025.
当连接放大器时, K3607 可以采用 6线 电路来减少长电缆带来的影响.
关键特性
- 适用于模拟 350 欧姆应变全桥传感器输出信号
- 30个 0.05mV/V 到 10mV/V 之间的校准信号
- 等效星形电路确保零点稳定性
- 适用于直流电压和高达 5KHz 载频传感器
- 便于携带
The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gage transducers belonging to the measurement chain. For this purpose the calibration instrument is equipped with a high-precision resistance network in star configuration, designed to simulate 350-Ω strain gage full-bridge transducers. The extremely low self-capacitance and self-inductance of the inbuilt precision resistors place the calibration instrument in accuracy class 0.025. When an appropriate measuring amplifier is used, the K3607 calibration instrument can be operated insix-wire circuit for balancing the ohmic and capacitive effects of long measurement cables.
| EN | |
|---|---|
| 数据表 Data Sheet |  |
| 操作手册 Operating Manual | |
| CE认证 CE-Certificate 092 | |