digiCLIP
digiCLIP - 将您的产品带入数字时代
您想以现代的方式测量力，重量，扭矩和压力吗？ digiCLIP将您的作品推向数字时代。 digiCLIP是用于工业环境的现代模块化放大器系统。 它有助于实现更快，更可靠的测量，并且安装也很容易。
当解决测量任务时，digiCLIP可以帮助减少停机时间！ 它支持TEDS（换能器中的电子数据表）。 digiCLIP可以识别配备了TEDS存储芯片的传感器。 不再需要复杂的配置和参数分配。 digiCLIP甚至可以由未经培训的人员设置。
由于digiCLIP使用标准的PROFIBUS DP-V1，CANbus或DeviceNet接口，因此digiCLIP可以适应您的自动化系统。 可以使用免费的digiCLIP软件通过PC进行所有设备设置。 在不关闭系统的情况下更换或改装放大器就不成问题-这要归功于“即插即测”和“热交换”功能。
|
|
|
|
|
digiCLIP modules |
DF30 |
DF31 |
|
600 Hz carrier frequency |
■ |
■ |
|
TEDS sensor recognition |
■ |
■ |
|
Number of digital inputs |
- |
1 |
|
Number of digital outputs |
- |
2 |
|
Interfaces: |
||
|
CANOPEN |
DF30CAN |
DF31CAN |
|
Profibus-DP |
DF30DP |
DF31DP |
|
DeviceNet |
DF30DN |
DF31DN |
Efficient system asset management: Device Type Manager (DTM) enables central access to all digiCLIP amplifiers
The new, free Device Type Manager (DTM) providescentral access to all digiCLIP amplifiers of your production system.
The DTM offers parameterization, control, and diagnostics functions. In addition, it provides a graphical user interface for intuitive handling. Installing the DTM is as easy as installing a printer driver on your PC. It can be integrated into any application using the standard FDT interface (Field Device Tool), for example, a monitoring or control system, engineering or asset management.
The advantages of a system featuring an FDT interface and DTM are obvious: From a central point in the system, the service engineer has access to all digiCLIP amplifiers by as little as one double-click and immediately gets a status report. Then he can start a detailed diagnosis and, on occurrence of an error, eliminate it without having to access the instrument directly.
Even if you are already using digiCLIP amplifiers, you can easily upgrade with the DTM. Click on software/firmware downloads in the right column to get the free download.
More information about the FDT interface and the DTM is provided in our current technical article.
ePLAN
In addition to the industrial amplifiers HBM provides the appropriate ePLAN macros. They allow easy and error-free integration of the instruments in the project planning of the automation environment.
ePLAN Electric P8 is an engineering tool for modern CAE softwaresupported by a database and facilitates consistent project planning, documentation and administration of automation systems. ePLAN macros enable users to easily integrate the process controllers in their project planning. Parts data, drawings and pin assignments are available in ePLAN Electric P8 immediately after import of the macros.
The free macros are available on the documentation CD included in the process controllers' scope of supply and can also be downloadedhere.
HBM makes fuselage assembly safer for modern commercial aircraft
The construction of modern commercial aircraft today increasingly involves the use of innovative composite materials such as GRP or GLARE (glass-fiber reinforced aluminum). The handling of these materials during assembly sets new...
Digital advantages for force measurement in printing presses: asset management with FDT containers and Device Type Managers
In a rotary printing press, the paper must always be held under as constant a tension as possible. This is the only way to prevent the paper getting folded or creased, or even torn. Not only that, but the only way to obtain...
Perfectly cut silicon wafers: digiCLIP ensures leaps in efficiency for the production of photovoltaic systems
The solar branch is booming – and therefore also the production of photovoltaic systems.
| EN | |
|---|---|
| 安全须知 Safety Instructions |  |
| 数据表 Data Sheet DF30CAN | |
| 操作手册 Operating Manual DF30CAN | |
| 数据表 Data Sheet DF30DP | |
| 操作手册 Operating Manual DF30DP | |
| 数据表 Data Sheet DF30DN | |
| 操作手册 Operating Manual DF30DN | |
| 数据表 Data Sheet DF31CAN | |
| 操作手册 Operating Manual DF31CAN | |
| 数据表 Data Sheet DF31DP | |
| 操作手册 Operating Manual DF31DP | |
| 数据表 Data Sheet DF31DN | |
| 操作手册 Operating Manual DF31DN | |