C18
C18 参考力传感器: 大力值测量传递装置
C18 参考力传感器是一种扭环式压向力传感器，对温度，侧向力和弯矩不敏感。体积小、重量轻，因此易于在不同位置安装和运输。不锈钢材质，紧致密封，防护等级为 IP68，结实可靠，具有优异的长期稳定性。
C18 力传感器额定量程为 10 kN 到 5 MN。其可满足力测量机转移装置可追溯标准，因此非常适合用作校准设备工作传感器，或作为需要确保测量设备可追溯性公司的工作标准。C18 用于多个国家计量机构，也非常适合移动应用以及地测定飞机重心。
C18 传感器始终经过校准，并配有安装底座和止推件，无需额外的加载件。总体来说， C18 能为你提供非常经济的高精度力测量解决方案。
- 精度等级 (ISO376): 0.5
- HBM 精度等级: 0.02
- 额定量程: 10 kN 到 5 MN
满足 ISO376 标准
- 测量精度符合ISO376 0.5级的要求
- 对弯矩不敏感；采用扭环原理，温度梯度影响小
- 测量范围宽, 从 2 kN 到 5 MN
- 校准用加载部件，包括安装底座和止推件
大量程、高性价比的测量结果
结实可靠
- 极为坚固, IP68 保护等级 – 在此精度非常少见，测试条件: 100 小时, 水下 3 m。
- HBM 承诺: 每个传感器均通过 HBM 内部 EMC 实验室测试，并通过 CE 认证。
- 带扭结保护的坚固电缆
- 不锈钢外壳
- 量程高达 5 MN
坚固设计，即使在恶劣的环境中也具有极高可靠性。
轻便，便于运输
- 采用扭环原理，直径小, 结构紧凑。
- 用户友好: 对于大量程传感器，基座和传感器可分别安装
- 激光标记使基座和力传感器易于对准；确保HBM重复性。
- 根据要求可装配插头
- 高性价比: C18 结合 QuantumX MX430B 或 QuantumX MX238B 高精度放大器 – 可组成校准用测量链。
重量轻，结构紧凑，容易运输
New: Also available with a nominal (rated) force of 5 MN
The transducer is available in 11 models with different nominal (rated) forces ranging between 10 kN and 5 MN, allowing it to be used in a wide range of applications. The complete measuring body and the force applications parts (base and thrust piece) included in delivery are made from stainless steel. They ensure optimum test results and at the same time prevent error loads.
The force transducer is distinguished by its precision. Class 0.5 according to ISO 376 is guaranteed. Class 00 is even possible on request for nominal (rated) forces from 500 kN. Main applications include calibration tasks such as e.g. the classification of material testing machines, or ensuring traceability of industrial test equipment. For these purposes, HBM calibrates its force transducers in its own laboratory, which has been accredited as a DKD laboratory for the the past 25 years.
|
Max. operating force [%] |
170 (10-1000 kN), 150 (2000-3000 kN), 135 (5000 kN) |
|
Nominal temp. range [°C] |
+10 ... +40 |
|
Protection system |
IP68 acc. to DIN EN 60529 |
|
Material |
base and thrust piece are made from stainless steel |
|
Direction of force |
compressive |
|
Nominal force |
10 kN, 20 kN, 50 kN, 100 kN, 200 kN, 300 kN, 500 kN, 1 MN, 2 MN, 3 MN, 5 MN |
|
Nominal sensitivity [mV/V] |
2 |
| EN | |
|---|---|
| 数据表 Data Sheet |  |
| 安装使用说明 Mounting instructions | |
| CE认证 CE-Certificate 210 | |