SLB700A/06VA
SLB700A/06VA：有电流或电压输出的应变传感器，适用于大力值测量
SLB700A/06VA 是一种集成电子仪表的应变传感器，通过螺钉可很容易地固定在结构上。对结构施加力，SLB700A/06VA可以可靠地测量产生的应变。由于应变通常与力成正比，只要进行相应的校准，应变传感器就可以用来测量施加的力。这一原理也被称为“分力测量”。
SLB700A/06VA 有源应变传感器与无源型（SLB700A）一样坚固，但由于其集成测量放大器，SLB700A/06VA 更具性价比。应变传感器的优点是，能够以可靠的方式测量甚至非常大的力。
Practical
- Easy mounting using four M6 screws
- Oil-resistant and a highly flexible cable, suitable for drag chains
- Compatible with the version without an amplifier; the two versions are interchangeable since they have identical dimensions and hole patterns
Proven for years in production environments: Easy retrofitting of machines is possible due to the full compatibility of active and passive strain sensors.
Cost-effective
- A cost-effective solution that provides an alternative to force sensors, particularly in cases of involvement of large process forces
- The machine dynamics remain unaffected
- Extremely cost-effective measurement chain, particularly due to the integrated bridge amplifier
- Calibration is easy, owing to the HBM teach-in procedure
Extremely cost-effective; enables extremely large forces to be measured, even on a tight budget. No additional electronics are required. An optimal resolution is guaranteed due to the teach-in procedure.
All-inclusive
- HBM also provides sensors for the calibration of the SLB700A/06VA
- Our service staff looks forward to calibrating your measurement chain for you
The cost-effective complete solution,ready to measure, available on request
| EN | |
|---|---|
| 数据表 Data Sheet |  |
| 安装使用说明 Mounting instructions | |
| CE认证 CE-Certificate 065 | |