T4A
T4A 扭矩传感器主要用于保证扭矩质量符合国家标准而进行的追溯性测量。
T4A 扭矩传感器的连接通过手动扳手或电动扳手来进行，而不能用气动扳手。
连接时，驱动端空间和输出端空间必须符合DIN 3121标准。T4A 扭矩传感器采用滑环来传递测量信号，因此可以使用所有应变全桥工业测量放大器。
关键特性
- 额定扭矩 5 N•m, 10 N•m, 20 N•m, 50 N•m, 100 N•m, 200 N•m, 500 N•m 和 1 kN•m
- 允许转速 4 000 rpm
- 任何方向进行扭矩测量
- 方型连接，安装更方便
- 结构紧凑，容易操作
Their main application here is traceability to national standards for the measured quantity of torque.
Transducers can be used both in conjunction with hand-held screwdrivers and motorized screwdrivers, but not with impact screwdrivers.
To take the screwing tools, the measurement shaft has an internal square to DIN 3121 at the drive end and an external square to DIN 3121 at the output end. Slip-ring transfer allows all industry-standard amplifiers for strain gage full bridges to be used.
| EN | |
|---|---|
| 数据表 Data Sheet |  |
| 安装使用说明 Mounting instructions | |
| CE认证 CE-Certificate 136 | |